implants for life
VADIN implants - Hip Product Catalogue maxROM total knee replacement system OptiFuse & OptiFuse Genta - Synthetic Bone Substitute OptiFuse Inject - Injectable, bioactive and resorbable bone substitute OptiFuse Sponge - Osteoconductive, haemostatic & resorbble matrix for filling of bone defects

Multiaxial System

Multiaxial System

Vadin’s Multiaxial trauma system is designed to allow 10° multidirectional screwing into the bone with fixed angle fixation of screw and plate. The system is comprised by 2 plates and the accompanying screws and is indicated for the treatment of comminuted, supracondylar intra-articular and extra-articular condylar fractures of the distal femur and proximal tibia, and fractures of osteopenic bones.

Multiaxial system is available in a series of plates and screws manufactured by Pure Titanium (ISO 5832-2) and Titanium Alloy (ISO 5832-3), respectively, and a series manufactured by Stainless Steel (ISO 5832-1).

Multiaxial System Options

Distal Femoral Locking Plates

  • Available in 4 sizes (6-15 holes, 180-342 mm long)
  • Right and left versions
  • Pre-contoured shape to fits over the distal femur and the femoral metaphysis and diaphysis
  • The tapered design at the distal end facilitates easy submuscular passage

Proximal Tibial Locking Plates

  • Available in 5 sizes (2-14 holes, 99-342 mm long)
  • Right and left versions
  • Pre-contoured shape to fits over the proximal tibia and the tibial metaphysis and diaphysis
  • The tapered design at the distal end facilitates easy submuscular passage

4.0mm Locking Cancellous Screws

  • Available in 11 sizes (50-100 mm long, in 5 mm increments)
  • Core diameter 2.8 mm
  • Hexagonical head for use with 2.5 mm Screw Driver
  • The deep cut and the wide spaced thread facilitate the enhancement of the holding force of the screw in the cancellus bone

5.5mm Locking Cancellous Screws

  • Available in 16 sizes (25-100 mm long, in 5 mm increments)
  • Core diameter 3.8 mm
  • Hexagonical head for use with 3.5 mm Screw Driver
  • The deep cut and the wide spaced thread facilitate the enhancement of the holding force of the screw in the cancellus bone

8.0 mm Locking Cannulated

  • Available in 8 sizes (55-90 mm long, in 5 mm increments)
  • Core diameter 5.5 mm
  • Hexagonical head for use with 4.5 mm Screw Driver
  • Cannulation diameter 2.0 mm
  • The self-drilling and self-tapping design facilitates the ease of insertion.
  • The wide cannulation allows the insertion of thick and stiff guide wires which assist the accurate placement of screw.

Multiaxial System Product Catalogues