implants for life
VADIN implants - Hip Product Catalogue maxROM total knee replacement system OptiFuse & OptiFuse Genta - Synthetic Bone Substitute OptiFuse Inject - Injectable, bioactive and resorbable bone substitute OptiFuse Sponge - Osteoconductive, haemostatic & resorbble matrix for filling of bone defects

2.4-2.7 Locking System

2.4-2.7 Locking System

The 2.4-2.7 locking System consists of anatomic and procedure specific plates for the treatment of various types of fractures of the distal radius. The system is comprised by 8 types of plates and by locking and cortical screws.

The system is available in a series of plates and screws manufactured by Pure Titanium (ISO 5832-2) and Titanium Alloy (ISO 5832-3), respectively, and another series manufactured by Stainless Steel (ISO 5832-1).

2.4-2.7 Locking System Options

2.4/2.7 Distal Radius Volar Side Column Locking Plates

  • Available in 3 sizes (3-5 holes, 49-67 mm long)
  • Right and left versions
  • Indicated for fixation of extra- and intra-articular fractures of the distal radius, especially for highly comminuted fractures

2.4/2.7 LCP Distal Radius Volar Plates, Extra – Articular

  • Available in 2 sizes (3 and 5 holes, 47 and 65 mm long)
  • Right and left versions
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 Distal Radius Volar Side Locking Plates

  • Available in 2 sizes (3 and 5 holes, 47 and 65 mm long)
  • Right and left versions
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 LCP Distal Radius Volar Plates

  • Available in 2 sizes (3 and 5 holes, 43 and 61 mm long)
  • Right and left versions
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 LCP Distal Radius Plates

  • Available in 2 sizes (5 and 6 holes, 48 and 57 mm long)
  • Designed to match the anatomy of the radial column
  • Reduced contact with the bone as to have minimum impact on the proper blood supply of the fractured region
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 LCP Distal Radius T-Plates

  • Available in 2 sizes (3 and 4 holes, 40 and 49 mm long)
  • Designed to match the anatomy of the radial column
  • Reduced contact with the bone as to have minimum impact on the proper blood supply of the fractured region
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 LCP Distal Radius L-Plates

  • Available in 2 sizes (3 and 4 holes, 40 and 49 mm long)
  • Designed to match the anatomy of the radial column
  • Reduced contact with the bone as to have minimum impact on the proper blood supply of the fractured region
  • Indicated for fixation of extra-articular fractures of the distal radius

2.4/2.7 Multiaxial Distal Radius Volar Side Column Locking Plates

  • Available in 3 sizes (3-5 holes, 4-66 mm long)
  • Right and left versions
  • The two columns at the head of the plate allow independent fine contouring of the radial and intermediate columns

2.7mm Locking Screws, Self - Tapping

  • Available in 13 sizes (6-30 mm long, in 2 mm increments)
  • Core diameter 2.0 mm
  • Hexagonical head for use with 2.4 mm Screw Driver
  • The self-taping feature eliminate the use of bone tap

2.4mm Cortical Screws, Self Tapping

  • Available in 22 sizes (6-40 mm long)
  • Core diameter 1.8 mm
  • Hexagonical head for use with 2.4 mm Screw Driver
  • The spherical design under the screw head provides compression whereas the thick core provides strength
  • The self-taping feature eliminate the use of bone tap

2.4mm Locking Screws, Self - Tapping

  • Available in 17 sizes (6-30 mm long)
  • Core diameter 1.8 mm
  • Hexagonical head for use with 2.4 mm Screw Driver
  • The self-taping feature eliminate the use of bone tap

2.4-2.7 Locking System Product Catalogues